PTP 700 Connectorized + Integrated

With the PTP 700, Cambium Networks breaks new ground in mission flexibility and overall project sustainability.

ONE RADIO – MANY MISSIONS :

  • Single radio covers 4.4 GHz to 5.9 GHz compatible with NTIA Redbook / NATO Band IV and
    FCC/ETSI requirementsDisaster recovery
  • Single radio can be be deployed with integrated panel antenna or larger gain dishes using N-type
    connectorization
  • Roadmap support for high-capacity multipoint architecture
  • Dynamic Spectrum OptimizationTM (DSO)
  • FIPS 140-2 Validated (Fall 2015)
  • Ruggedized to MIL-STD-810G
  • Supports IPv6, SyncE, 1588v2

Specification Sheet

Specs PTP 700 2015-1
Specs PTP 700 2015-1
Specs_PTP_700_2015-1.pdf
193.2 KiB
194 Downloads
Details

Canopy PTP 700 series


4.4 GHz to 5.9 GHz Supports IPv6, SyncE, 1588v2 
With the PTP 700, Cambium Networks breaks new ground in mission flexibility and overall project sustainability.

SPECIFICATIONS


PTP 700
Product
MODEL NUMBER 5 GHz (Connectorized C050045B001A C050045B003A C050045B005A C050045B007A)
RF BANDS1 Wide-band operation 4.400 to 5.925 GHz in single SKU
Supported bands include the following:
- NATO Band IV / NTIA Compliant (4.40 GHz to 4.99 GHz)
- 4.9 GHz Public
- 5.1/5.2/5.4/5.8 GHz FCC, 5GHz ETSI
CHANNEL SIZES1 5, 10, 15, 20, 30, 40, and 45 MHz channels
SPECTRAL EFFICIENCY 10 bps/Hz maximum
CHANNEL SELECTION By Dynamic Spectrum Optimization™ (DSO) or manual intervention;
automatic selection on start-up and continual self-optimization to avoid interference
MAXIMUM TRANSMIT POWER1 27 dBm at BPSK; 23 dBm at 256 QAM
SYSTEM GAIN1 Integrated: Up to 161 dB with 20 MHz channel and integrated 21 dBi antenna;
varies with modulation mode, channel size and spectrum
RECEIVER SENSITIVITY -97 dBm with 5 MHz channel
MODULATION / ERROR CORRECTION Fast Preemptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual payload MIMO
DUPLEX SCHEME Time Division Duplex (TDD)
Adaptive or fixed transmit/receive duty cycles.
Split frequency operation allows separate transmit and receive frequencies where allowed by regulation.
Optional TDD synchronization using PTP-SYNC Module
ANTENNA Connectorized+Integrated: 21 dBi flat panel or external antenna via 2 x N-type connectors
RANGE Up to 124 miles (200 km)
SECURITY 128/256-bit AES Encryption (optional)
HTTPS and SNMPv32
Identity-based user accounts
Configurable password rulesUser authentication and RADIUS support
Event logging and management; optional logging via syslog
Disaster recovery and vulnerability managementFIPS-197 compliant
FIPS 140-2 Level 2 (compliant at launch); NIST Validation late-2015
ETHERNET BRIDGING
PROTOCOL IEEE 802.3
USER DATA THROUGHPUT Dynamically variable up to 450 Mbps
Maximum conditions : 2x2, 45 MHz channel1 , 256 QAM
LATENCY 1 – 3 ms one-direction latency
QoS 8 Queues
PACKET CLASSIFICATION Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
PACKET PERFORMANCE Line rate ( >850K packets per second)
TIMING TRANSPORT Synchronous Ethernet; IEEE 1588v2 (optional)
FRAME SUPPORT Jumbo frames up to 9600 bytes
FLEXIBLE I/O 2 x Gigabit Ethernet copper ports:
RJ-45 Port 1: Data + PoE power input
RJ-45Port 2: 802.3at PoE output port
1 x SFP port (single-mode fiber, multi-mode fiber, and copper Gigabit Ethernet options available)
T1/E1 TDM SUPPORT (optional) 8 x T1/E1 TDM (Network Indoor Unit (NIDU))

G.823/G.824-compliant timing
T1/E1 LATENCY (one way) 1 to 3 ms typical depending on range, bandwidth, modulation mode and number of T1/E1 ports; accurate T1/E1 latency figures can be
MANAGEMENT & INSTALLATION
LED INDICATORS Power status, Ethernet link status, and activity on Extended Range PoE supply
NETWORK MANAGEMENT In-band and out-of-band management (OOBM)
SYSTEM MANAGEMENT IPv6/IPv4 dual-stack management support
Web access via browser using HTTP or HTTPS/TLS2
SNMP v1, v2c and v3, MIB-II and proprietary PTP MIB
Cambium Wireless Manager, WM 4.0/SP4 or higher (optional)
In-band On-line spectrum analyzer (no impact on payload traffic or network operation)
INSTALLATION Built-in audio and graphical assistance for link optimization
CONNECTION Distance between outdoor unit and primary network connection: up to 330 feet (100 meters) using Power-over-Gigabit Ethernet;
PHYSICAL
DIMENSIONS Connectorized+Integrated Outdoor Unit (ODU):
Width 371 mm (14.6”), Height 429 mm (16.9”), 96 mm (3.8”)

Connectorized ODU:
Width 204 mm (8.0”), Height 318 mm (12.5”), Depth 90 mm (3.5”)
WEIGHT Connectorized+Integrated ODU:
5.3 kg (11.7 lbs.) including bracket

Connectorized ODU:
3.1 kg (6.8 lbs.) including bracket
OPERATING TEMPERATURE -40° to +140° F (-40° to +60° C), including solar radiation
SHOCK, VIBRATION, TEMPERATURE, HUMIDITY MIL-STD-810G
DUST-WATER INTRUSION PROTECTION IP66 and IP67
WIND SPEED SURVIVAL 200 mph (322 kph)
POWER SUPPLY AC + DC power injector: -40° to 140° F (-40° to +60° C); 70 W; 90-240 VAC, 50/60 Hz or 48 VDC
Dimensions: Width 9.75” (250 mm), Height 1.5” (40 mm), Depth 3” (80 mm)
POWER CONSUMPTION 35 W maximum (up to 70 W with 802.3at device on auxiliary port)
ENVIRONMENTAL & REGULATORY
PROTECTION AND SAFETY UL60950-1 and -22; IEC60950-1 and -22; EN60950-1 and -22;
CSA-C22.2 No. 60950-1; CSA-C22 No. 60950-22-7; CB approval for Global
RADIO 4.9 GHz: FCC Part 90Y, RSS-111
5.x GHz: FCC Part 15, sub-parts 15C and 15E; RSS 247 Issue 1;
EN 302 502; EN 301 893; EN 302 625; Eire ComReg 02/71R1, UK Approval to IR2007
EMC Europe – EN 301 489-1 and -17; FCC Part 15B Class B
ATEX/HAZLOC optional ATEX: Category 3 / Zone 2; Gas Group IIC, Temperature Class T4